How to Make a Cable Peeler
A cable peeler is a handy device for cutting and stripping wire. It helps to keep your workspace clean and tidy, while also reducing the risk of injury. You can make one yourself, or use a kit designed for the job.
There are many different types of cable peelers on the market, but they all work in similar ways. Each has a pair of jaws that close when you squeeze the handles. The two blades will collapse to cut through the cable.
The most basic cable peeler consists of two jaws that have a spherical blade in the top and a flat blade in the bottom. The blade in the bottom jaw cuts through the cable while the blade in the top jaw cuts through the cable jacket.
This simple tool is great for peeling single-core cables, like power lines or phone cords. You can also use it to remove cable sheaths from multi-core cables.
Stripping a cable is an important part of electrical maintenance and repairs, as it allows you to check the integrity of the wires. You’ll want to check for kinks, bends, or evidence of corrosion in the wires. This can help you avoid expensive repairs and replacements in the future.
If the wires are corroded, they can pose a hazard to anyone who touches them, which is why you should always wear safety gear and a hard hat when stripping cable. This can prevent you from getting injured and will ensure that you’re ready for any emergencies that may occur during a repair project.
In addition, you should avoid bending the cable when stripping it. This can damage the insulation and cause the wires to break.
The best way to strip a cable is to cut it in two places: first, remove the outer jacket and then strip the center conductor. This will give you a clear path to ground in the event of an electrical failure.
Once you’ve removed the outer jacket, you should peel back the braided layer to expose the dielectric that surrounds the center conductor. This will reveal any wires, filings or other conductive materials that are between the center conductor and the braid. You’ll also want to remove any other traces of corrosion that are visible.
This is a simple process, but you’ll need to be careful. It’s best to use a tool designed for this purpose, such as a knife or stripper.
For example, the Slice(r) 10550 manual utility knife is a safe and effective tool for cutting cable, and can be used by anyone with a little experience. It’s also a lot cheaper than buying a mechanical cable stripper, which can cost thousands of dollars.
To strip a cable, you need to use the right tools and techniques. You’ll need a stripper for the type of cable you’re working with, as well as a sharp knife and a razor blade.
A good knife and stripper will be able to remove the outer jacket from a coaxial cable without damaging the center conductor or any of the other components inside it. This can save you time and money, as it will reduce the amount of scrap metal you’ll have to buy.
